Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions
4.
Using key (J), loosely install screw (C) through lock washer
(D), flat washer (E), and outer column (B) into adjustment
hole in inner column (A) (See Figure 3).
NOTE:
Two adjustment holes provided in columns 6" or longer
(152mm) in length. Either adjustment hole can be used
to provide 1" (25mm) adjustment increments.
B
4
C D E
A
Figure 3
5.
Adjust column (A or B, as applicable) to desired length, then
rotate and lock into position (See Figure 3).
NOTE:
Any locking slot can be used to provide 2" (51mm)
adjustment increments.
6.
Tighten screw (C) using key (J) (See Figure 3).
7.
Install and tighten set screws (standard (F) or security (G),
as desired) using key (J) (See Figure 4).
DIMENSIONS
5
6
Fixed Length Column
LENGTH
F x 2
7
G x 2
8.
Install and secure projector/display mount (not included) to
lower end of column (A or B, as applicable) following
instructions included with mount.
Adjustable Length Column
ALL THREADS
1-1/2" NPT
2.31 OD
1.90 OD
1.0
FULLY EXTENDED
Figure 4
1.00
OUTER TUBE
LENGTH
MIN LENGTH
1.00
FULLY RETRACTED
1.50 ID
DIMENSIONS: INCH
3
Publicidad
Tabla de contenido
