Uhf Filters Setup; Setting The Levels - Triax TMB 200 Manual Del Usuario

Programmable Multiband Amplifier
TMB 200 & TMB 200S

UHF filters setup.

AMP IN
XX1
p
UHF CHAN UHF CHAN
Menu
F1 21-25 F1 21-25
p
CHAN UHF UHF CHAN
Menu
Fx 31 Fx 31-31
p
• Unit in standby mode, push a button to reach the SETTINGS/Config menu.
• Press the  button until the display shows the UHF CHAN / Fx menu.
• Press Menu button to enter the function
•
Press the buttons + or - to change the start channel
•
Confirm by pressing Menu
•
Press the buttons + or - to change the end channel
•
Confirm by pressing Menu
• Proceed the same way for the other channels
Note:
• In LTE 21-60 only channel 21 to 60 are available.
• A offset function offers a fine tuning

Setting the levels.

There are three types of level setting:
• "Manual" setting of output levels (menu Fx / Att 20)
• "Manual" setting of output levels FM VHF and UHF (menu UHF / Att, VHF / Att , FM / Att)
• automatic UHF channel gain control (Auto lvl menu)
Note :
• Display20 = 0 dB attenuation
awi -july 14
+
UHF CHAN
Menu
-
F1 21 - __
+
UHF CHAN
Menu
-
Fx 31 - __
14
+
Menu
-
+
3s
UHF CHAN
-
Tun -9 +9
+
Menu
-
+
3s
UHF CHAN
-
Tun -9 +9
Menu
Menu
TMB 200-V1