Clatronic KM 2894 Profi Cook Instrucciones De Servicio/Garantía página 77

●
• Make sure that the switch (2) is positioned on „0" and that the appliance plug
is not inserted when changing the attachments.
• Only now can the attachments be mounted and used.
• While food is being mixed the safety cover (5) must be in position on the drive
shaft of the processor bowl in order to avoid injuries and vice versa.
• The appliance cannot be used without the safety lid!
€ ✌ ✍ ✎ ✏ ✎ ✌ ✑ ✎ ✑ ✒ ✏ ✓ ✔ ✕ ✎ ✖ ✎ ✑ ✒ ✗ ✌ ✘ ✙
1. Please all parts before using for the fi rst time (see „Cleaning").
2. Place the mixing bowl (4) on the base in such a way that the circular mark
is pointing to the arrow
mark is pointing to the arrow
mounted on the drive shaft of the processor bowl (8).
€ ✌ ✍ ✎ ✏ ✎ ✌ ✑ ✎ ✑ ✒ ✏ ✓ ✔ € ✛ ✌ ♦ ✔ ✍ ✍ ✌ ✛ ✗ ✌ ✘ ✙
1. Place the processor bowl (9) on the drive shaft (8) in such a way that the left
mark of the bowl is pointing to the lower mark
2. Then turn the bowl clockwise until you hear it lock into place. The right
mark of the bowl is now pointing to the
until it locks into place and can no longer be twisted.
3. The safety cover (5) must be mounted on the drive shaft of the mixing bowl
(3).
4. The accessories (14, 16, 17, 27) can be attached directly to the drive shaft (8).
5. Attach the accessory you wish to use (grater or rasp) to the attachment holder
(22). The accessories are to be found in the storage box (19).
6. Attach the locating pin (21) to the selected tool (only for accessories 22 and
26). The metal tip points upwards.
7. Place the lid on the processor bowl (10) such that the OPEN mark is positi-
oned above the recess of the base. The metal tip of the locating pin (21) has
to engage into its bearing in the lid. Then turn the lid in a clockwise direction
until the protruding section of the lid is heard to lock in the safety device on
the base of the mixer.
8. To remove the lid, turn it in an anticlockwise direction.
❉ ✌ ✜ ✢ ✙ ✔ ✣ ✤ ✥ ✔ ✏ ✦ ✣ ✦ ✍ ✏ ✔ ✧ ★
with lid locks into place correctly and the safety cover of the mixing drive is in
place (5) and vice versa. Only remove the lid of the bowl and the mixing vessel
when the machine is switched off.
76
✺ ✩ ✩ ✩ ✩ ✪ ✫ ✺ ✪ ✬ ✭ ✮ ✯ ✰ ✱ ✲ ✳ ✴ ✵ ✶ ✷ ✴ ✴ ✸ ✹ ✻
■ ✁ ✂ ✄ ☎ ✆ ✆ ☎ ✄ ✝ ✞ ✁ ☎ ✁ ✟ ✠ ✂ ✡
❖ ☛ ✡ ☞ ☎ ✄ ✝ ✞ ✁
on the base. Turn the mixer (4) clockwise until the
✚
on the base. The safety cover (5) must be
✚
mark on the base. Turn the bowl
✚
The motor can only be switched on if the processor bowl
on the base.
✚
✮ ✻ ✩ ✫ ✯ ✩ ✮ ✫ ✫ ✱ ✼ ✽ ✹ ✾ ✿ ✽ ✾ ✺ ✮ ❀ ❁ ✳