First Use - Benavent CHBH300E Manual De Instrucciones

First use

Cleaning the interior
Before using the appliance for the first time, wash the interior and all
internal accessories with lukewarm water and some neutral soap so as to
remote the typical smell of a brand-new product, then dry thoroughly.
Important! Do not use detergents or abrasive powders, as these will
damage the finish.
Temperature Setting
Temperature Setting
Turn the thermostat knob to set the temperature.
x Position 0: Appliance is turned off.
x Position 1 to 6: Appliance works under freezer mode. To set colder
temperature, turn the thermostat knob to the right.
To set a lower temperature, turn the thermostat knob clockwise, 6 being the
lowest temperature.
Tip: Normally, it´s recommended to set the temperature to "4" or colder for
optimum food preservation. The longest storage time in this situation is no more
than 1 month. Not set recommended setting may reduce the storage time.
Button Turbo:
To fast freeze food, turn the appliance under FREEZER mode and press TURBO
button. Press the button again to quit fast freezing when the appliance reaches
desired temperature or wait for twelve hours till the appliance quit fast freezing
itself.
When the RUNNING Light is on, it indicates that the compressor is running.
When the SUPER Light is on, it indicates that the appliance is working under Fast
Freeze mode.
The appliance may not operate at the correct temperature when it is placed in a
particularly hot environment or when the door is frequently opened and closed.
13