Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2.2 For Indoor Use, in Attic placement, Prepping for Connection
Select entry point to house. Drill hole at entry point. Attach coaxial cable with water proof cap
end to connector in the antenna. Attach antenna back to hardware already mounted to beam
or wall, or just use the table stand for placement. Feed lose end of coaxial cable through drilled
opening.
2.3 If you haven't already done so, attach coaxial cable to connector in
the antenna
Connect other end of the coaxial cable to the short coaxial cable from power inserter. Attach
the long coaxial cable from power inserter to the ANTENNA/CABLE IN connector on the back
of the TV or converter box. Connect the power adapter to the DC socket in power inserter. The
antenna must be powered in order to function.
LED
!
5
ON/OFF
The
Push the smart switch On or Off and select the switching
with which more channels are received.
·Switch Off - The LED indicates yellow for normal reception.
OFF/ON
·Switch On - The LED indicates
Scan channels after each switching in the power inserter.
LED
Power Inserter
must be powered in order to function.
ANT/IN
Back of TV
CABLE IN
green
for
stronger
reception.
2
Publicidad
Tabla de contenido
