AGV COMPACT ST Instrucciones Del Propietario página 24

1
2
1
24
6) ACCESSORIES
This helmet is equipped with a retractable internal sun visor
that is easily operated from the outside and can be removed
without the use of tools for cleaning or replacement.
6.1) Sun visor operation
The sun visor is operated using the lever located on the left
side of the helmet. To lower the sun visor push the lever into
the rear position (1).
To retract the sun visor, push the lever into the forward po-
sition (2).
6.2) Sun visor removal/installation
The sun visor is made of non-scratch polycarbonate and
has connections that fit into internal housings located at the
side of the cheek pads.
We recommend that you carry out the following opera-
tions while resting the helmet on a flat surface.
To remove the sun visor, lower it completely and raise the
visor until it is fully open (1).
WARNING
Only use original AGV SpA accessories. To know which are the
original AVG accessories go to www.agv.com.
The use of non-original accessories may compromise the safety
of the helmet and will render all product warranty null and void.
AVG SpA shall reject all responsibility in case of use of
non-original accessories (e.g. communication systems, action
camera, visors and other accessories).