Safety Precautions; Driver And Utility Installation - media-tech MT4208 Guia De Inicio Rapido

■ CD-ROM Drive
■ An 802�11n, 802�11g or 802�11b Access Point (for in-
frastructure Mode) or another 802�11n, 802�11g or
802�11b wireless adapter (for Ad-Hoc; Peer-to-Peer net-
working mode�)

Safety precautions

■ Do not use or store the device in dusty places, where
the humidity is high or in extreme temperatures�
■ Do not operate the device with wet hands to avoid the
risk of device damage or electric shock�
■ Do not clean the device with chemicals, such as ben-
zine or detergents – always clean the device with a soft,
dry cloth�
■ Disconnect the device from the computer prior to
cleaning�
■ Do not modify or fix the device yourself in any way, it
might void the guarantee�
■ Do not drop or shake the device�

Driver and Utility installation

1� Power on your PC, let the operating system boot up
completely, and log in as needed� Connect the wireless
adapter to the USB connector� If the Found New Hard-
ware Wizard displays, click Cancel button�
2� Insert the supplied CD into the CD-ROM drive� The start
menu should launch automatically� Under Windows
Vista and Windows 7, you may also need to click Run:
Autorun.exe in the AutoPlay window� When launching
the start menu, you may have to click the Allow button
(Windows Vista) or Yes (Windows 7) in the User account
control window, and enter the name and password of
the user with administrative privileges, if the current
user is not granted them�
3� If the menu window does not start automatically, se-
lect menu Start > Run (in Windows Vista and 7 sys-
tems: Start > All programs > Accessories > Run)� In
the Open field of the Run window, enter X:\Autorun�
exe (where X is the optical drive letter) and press Enter�
4� Select the install option to run the installer�
5� Read the license agreement and accept it by selecting
the I accept the terms of the license agreement op-
tion. Click Next >�
6� If you want to install the drivers along with the soft-
ware (recommended), select the Install driver and
Ralink WLAN Utility option� If you want to install the
driver alone, click Install driver only� Click Next >�
7� (Windows 2000/XP only) If you want to use the soft-
ware supplied with the adapter (recommended), select
the Ralink Configuration Tool option and click Next>.
If you want to use the system wireless network wizard,
select the Microsoft Zero Configuration Tool option
and click Next >�
EN
3