Ferm SSM1005 Traducción Del Manual Original página 5

SCROLL SAW MACHINE SSM1005
The numbers in the following text refer to the
picture on page 2-3
Carefully read this manual before using
the machine. Make sure that you know
how the machine functions and how to
operate it. Maintain the machine in
accordance with the instructions to make
sure it functions properly. Keep this
manual and the enclosed documentation
with the machine.
Introduction
This scroll saw is great for making toys, puzzles,
games, fretwork and jewelry. Because of its
cutting capacity it is a handy do-it-yourself tool. It
cuts wood up to 40 mm thick as well as plastics
and non-ferrous metals.
Contents
1. Machine data
2. Safety instruction
3. Installing accesoires
4. Operation
5. Maintenance
1. MACHINE DATA
Technical data
Voltage
Frequency
Power consumption
Speed count w/o load/min
Max saw depth 90°
Max saw depth 45°
Weight
Lpa (sound pressure) w/load
Lpa (sound pressure) w/o load
Contents of the package
1 Scroll saw
1 Protective cover
2 Screw for installing the protective cover
10 Saw blades
2 Adapters for universal saw blades
2 Allen key
1 Dust blow pipe
3 Rubber feet
3 Screws with nuts and rings for installing the
rubber feet
1 Cross guide
1 Operating manual
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories
for transport damage.
Features
Fig.A
1. On/off switch
2. Locking nut
3. Cross guide
4. Saw blade holder
5. Protective cover
6. Spanner
7. Dust blow pipe
8. Rubber feet
2. SAFETY INSTRUCTIONS
Explanation of the symbols
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Wear ear and eye protection
230 V~
50 Hz
90 W
Specific safety instructions
1440/min.
• Wear safety goggles and a dust mask.
40 mm
• This scroll saw machine is for indoor use only.
10 mm
• Ensure that the teeth of the saw point
12.5 kg
downwards prior to using the machine.
73 dB(A)
• If teeth of the saw blade are missing or are
86 dB(A)
damaged, then the saw blade must be
replaced immediately.
• Use the scroll saw machine on a stable and flat
surface.
• Never exert pressure on the sides of the saw
blade because it may break.
• Check wooden work pieces for possible
protruding nails etc. and remove these.
• Do not touch the sawing surface with your
hands.
• Never leave the sawing machine unattended
while it is running.
5