Tools And Materials; Before You Begin - Kohler K-200 Guia De Instalacion

Tools and Materials

Phillips
Screwdriver

Before You Begin

CAUTION: Risk of property damage. Do not install the unit
where the temperature may drop below freezing, may be
exposed to direct sunlight, or may be exposed to heat.
CAUTION: Risk of personal injury or property damage.
Use caution when installing near water pipes or electrical
lines.
NOTE: This faucet features an asymmetrical design. Although the
faucet body may be positioned at any location around the sink, we
recommend the faucet body be located at 45 degrees to the front of
the sink.
Observe all local plumbing and building codes.
Shut off the water supply.
Inspect the hoses for any sign of damage. Replace if necessary.
Install the water filtration system to a cold water supply only. Do
not install the water filtration system to a hot water supply.
If needed, clean the exterior of the unit with mild soap and water.
Do not use chemical cleaners.
The water filtration system must be mounted vertically.
If a faucet other than a KOHLER beverage faucet will be installed
with the water filtration system, you will need to purchase an
adapter to connect the outlet of the filter to the faucet inlet.
Do not use this water filter system with a standard faucet that
uses hot and cold inlets. A single inlet faucet, such as a KOHLER
beverage faucet, must be used.
087388-2-AH
Plus:
• Adapter
• Thread Sealant Tape
Adjustable
Wrench
2 Kohler Co.