Maintenance; General Information; Warranty; Troubleshooting - Locinox SlimStone-2 Manual De Usuario

8.

MAINTENANCE

• Clean the housing and display using a soft cloth,
moistened with a neutral cleaning agent
• Never use fuel or chemicals on the device since
they might harm the housing
9.

GENERAL INFORMATION

• Please observe the local regulations on the
deposit of packaging material and of appliances
no longer in use

11. TROUBLESHOOTING

PROBLEM
• All lights are flashing
• The SlimStone-2 lighting is off after pushing a
button
• The SlimStone-2 does not react after entering
the code
• The sequence light remains lit
• The lights flash after entering the PIN code and
confirmation by pressing [#]

12. FREQUENTLY ASKED QUESTIONS

QUESTION
• Is the keypad heated?
• How weatherproof is the SlimStone-2?
• Can I use the SlimStone-2 with sectional doors?
• Is it possible to control the same device from
two SlimStone-2s?
A discarded device can either be returned to your dealer or be sent back to Locinox. This product's
recycling fee is € 0,2.
The WEE marking on the product indicates that it may not be thrown away together with normal
household waste and must be handed over to a designated collection point for the recycling of
electrical and electronic rejects.
As manufacturer of this product, we guarantee that we have taken all the necessary steps in order
to comply with the current safety requirements for this product.
SlimStone-2
• Our packaging material is eco-friendly. It can be
divided into 2 materials: cardboard (box) and
expandable polyester (buffer).
• Your device is made of recyclable materials

10. WARRANTY

A 2 year warranty covers all electronics
SOLUTION
• When wrong codes have been entered
repeatedly, the SlimStone-2 is blocked.
See 7.2.
• Verify the power supply connection
• Entering a code must always be confirmed with
[#]
• Check if the cables of the override button are
insulated
• Possibly you set a time of 99 seconds
• The entered code does not match any of the
registered codes. See 7.2
ANSWER
• Yes, SlimStone-2 has a regulated heating system
which keeps the keys frost-free
• SlimStone-2 is designed to comply with the IP68
standard
• Yes, by setting the relay hold time to 0, a pulse is
given with which sectional doors can be controlled
• Yes, Two SlimStone-2's (A and B) can control the
same device: Start by connecting the device to
SlimStone-2 A as described on page 59. Next,
connect one of the control inputs of SlimStone-2
A to the COM contact of SlimStone-2 B. The NO
contact of SlimStone-2 B should be connected to
the 0V/N line. Please note that codes need to be
programmed on both SlimStone-2's.
EN
13