Faber hoods victory Manual Del Usuario página 5

CONTROLS
Button Function
A Turns the lights On/Off.
B Press briefly: turns the motor Off or
On. When turning on, the motor will
start at the last speed set (with the
exception of intensive or 24h).
Press and hold for approximately
4 seconds to Reset the filter alarm
(see paragraph on Maintenance).
Press and hold the button for ap-
proximately 3 seconds, with all the
loads turned off (Motor and Lights),
to turn the Activated Charcoal Fil-
ter alarm on/off (see paragraph on
Maintenance).
Led C
Fixed Signals the Metal Grease Filter saturation alarm,
indicating that it is necessary to wash the filters.
The alarm is triggered after the Hood has been
in operation for 100 working hours (reset see the
parag. Maintenance).
Flashing
When this is activated, it signals the Activated
Charcoal Filter saturation alarm, indicating that the
filter must be changed; the Metal Grease Filters
must also be washed. The Activated Charcoal Fil-
ter saturation alarm comes into operation after the
Hood has been working for 200 hours (activation
and Reset see the parag. Maintenance).
LIGHTING
Warning: This appliance is fitted with a white LED
lamp classed as 1M according to EN 60825-1: 1994
+ A1:2002 + A2:2001 standards; maximum optical
power emitted @439nm: 7µW. Do not look directly at
the light through optical devices (binoculars, magnifying
glasses...).
• For replacement contact technical support ("To
purchase contact technical support").
Display
On/Off.
On/Off.
5