Installation Instructions; Maintaining The Device; Accessories And Options - Walimex Pro Softbox faltbar Manual De Instrucciones

4. Installation instructions

Step I
Fasten the Softbox adapter in the speed ring of
the Softbox. For this purpose loosen 4 screws and
insert the Softbox adapter. Tighten the speed ring
fastening screws again.
Step II
Mount the Softbox with the matching Softbox
adapter to your flash. Make sure that the Softbox
adapter clicks into place on your flash and that the
Softbox fits tightly and reliably.
Step III
Unfold the Softbox and press the rod joints towards
the inside to open the Softbox.
14
Step IV
Fasten the inner diffuser by using the loop
fastener. To complete the setting pull the front
diffuser over the Softbox shell.

5. Maintaining the device

Allow the Softbox to cool down completely before cleaning.
Clean Softbox and diffuser only with a damp cloth.
Use the original packaging or the transport case for transport and storage.

6. Accessories and options

You find optimal accessories for your device at www.walimexpro.de
15