Machine Care; Machine Storage - Bissell STAINPRO 4 Manual Del Usuario

D
Care,
Maintenance & Storage
D-1 Machine care
For best results, a few simple steps can
assure your machine is well maintained after
your
cleaning is complete.
1. Turn power switch OFF. Unplug the
machine and wrap the power cord.
2. After emptying the 2-in-1 water tank, rinse
it with running hot tap water, taking care to
clean underneath and around the heavy duty
bladder. Clean out red lint screen. Removable
nozzle may be rinsed if necessary. Refer to
section C-4.
3. Replace the 2-in-1 water tank on the
machine.
4. Any loose hair or debris can be pulled
from the brush roll and thrown away.
5. To clean attachments, remove from hose
and rinse in clean, running water. Dry before
storing. Clean the hose by suctioning clean
water from a bowl. Before wrapping back on
machine, lift end of hose and stretch out to
ensure all water is cleared from hose. Refer
to section C-5, illustrations 11 and 12.
6. Wipe the machine's exterior with a soft
cloth.
7. After carpet is dry, vacuum again to
remove hair and fuzz.
D-2 Machine storage
Put the unit away in a closet or basement for
the next use. Store cleaner in a protected,
dry area. Since this product uses water, it
must not be stored where there is a danger
of freezing. Freezing will damage internal
components and void the guarantee.
To reduce the risk of electric shock, turn power
switch off and disconnect plug from electrical
outlet before performing maintenance or
troubleshooting checks.
Do not store unit where freezing may occur.
Damage to internal components may result.
www.BISSELL.com
9