Pleasant Hearth OFW909RC Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
2. Attach ash catcher (G) to fire bowl (F) by
inserting three M5x10mm bolts (AA) into
predrilled holes and secure with M5 nuts (BB).
Tighten with wrench (FF) and screwdriver.
Hardware Used
AA
M5x10mm Bolt
BB
M5 Nut
FF
Wrench
3. Attach legs (I) to lower ring (J) using
M6X18mm (CC). Do not tighten at this time.
Hardware Used
CC
M6X18mm Bolt
4. Attach leg (I) and lower ring (J) to slate
top (H) using two M6 Nuts (EE).
Repeat using remaining three legs.
Tighten all hardware, including from step 3,
with wrench (FF) and screwdriver.
Hardware Used
EE
M6 Nut
FF
Wrench
2
x 3
x 3
3
x 4
4
I
H
x 8
5
AA
G
I
CC
J
J
F
BB
EE