Avtech H.265 NVR Serie Guia De Inicio Rapido página 9

b) Select
Then, Click
NETWORK TYPE
IP
PORT
USER NAME
PASSWORD
NETMASK
GATEWAY
PRIMARY DNS
Check  to assign the camera to a specific channel automatically, and choose
c)
ASSIGN EDIT DEVICE TYPE

CH01
d) The
Note: To configure this recorder to access other IP camera connected remotely for live viewing or video
backup, you need to connect this recorder to Internet first.
CHANGE USER NAME AND PASSWORD
It's highly recommended to change the user name and password of this device to keep your account safe. Otherwise,
any person could access this device if he knows the default user name and password.
If you didn't go through the setting wizard at the first place, you'll be prompted to change the user name and password:
PLEASE BE ADVISED TO MODIFY THE DEFAULT
ACCOUNT TO ENSURE YOUR INFORMATION SECUIRTY.
 MODIFY
O REMIND ME LATER
O DON'T REMIND ME ANYMORE
Choose MODIFY to start the change immediately.
To change later, select MENU  ACCOUNT  USER LIST, and choose
password for "admin".
EDIT
(EDIT), and change the network type from STATIC to DHCP.
APPLY
to save your changes.
SETUP
IP
IPCAM 10.1.1.14
device
will then detect the IP camera and display images soon.
WARNING
CONFIRM
USER LIST
USER NAME
admin
DHCP
10.1.1.14
88
Admin
*****
255.255.255.0
10.1.1.10
8.8.8.8
CANCEL APPLY
IP SEARCH
NETMASK GATEWAY
255.255.255.0 10.1.1.10
GROUP
SUPERVISOR
ADD
PRIMARY DNS PORT
8.8.8.8 88 00:0E:53:31:06:E5
REFRESH
to change the default user name and
.
MAC VENDOR
AVTECH
ADD
7