Parts Included; Tools Required - Knape & Vogt HyLoft Manual Del Usuario

M

Parts Included:

2-Wire Grids
24" x 48"
2-48" Support Frames (2 holes)
2-48" Support Frames (6 holes)
40-Hex Locking Nuts 5/16"(8mm)
M
4-Hex Bolts ¼" x ½" (6mm x 13mm)

Tools Required:

3/16" Power
Drill
Drill Bit
(4.8mm)
Joists
24" to 42"
apart
IMPORTANT-Read through entire instructions before beginning any installation.
4-Angle Brackets
8-Lag Screws
4-Clamps
4-Hex Nuts Serrated
¼" (6mm )
OR
7/16" & 1/2" 7/16"(11 mm) &
Wrench 1/2"(13 mm)
(11 mm & 13 mm) Socket Wrench
or Nut Driver
ASSEMBLY INSTRUCTIONS
SuperPro 48" X 48"
Ceiling Mounted Shelf
Item # 00180 white
Item # 00183 hammertone
4-Downrods-Straight
2-Right Facing Downrods with Feet
5/16" X 2 ½" (8mm x 64mm)
4-Hex Bolts 5/16" x 2" (8mm x 50mm)
Stud/Joist Framing
Square
Finder
(optional) (optional)
2-Left Facing Downrods with Feet
36-Hex Bolts 5/16" X ½"
(8mm x 13mm)
Eye Protection
Pencil
Tape Measure
Ladder or
Step Stool
Page 3 of 12