Downspout Assembly Instructions - Excalibur EPMG8 Manual

DOWNSPOUT ASSEMBLY INSTRUCTIONS

1 - DOWN SPOUT
B
Ring Nut
A: Insert the Down Spout (1) to the Down Spout Ring (2) .
B: Connect Down Spout (1) and the Down Spout Ring (2) to the Ring Nut on the
Grinder Head .
C: Turn the Down Spout Ring(2) from the "Close" direction clockwise, then fasten the
Down Spout Ring (2) to the Ring Nut .
D: Adjust the opening of the Down Spout, make sure the opening is facing downwards
as shown in the illustration .
DISASSEMBLY:
Turn the Down Spout Ring (2) from the "Open" direction counterclockwise to disassemble .
Remove down the Down Spout (1) and Down Spout Ring (2) .
www.ExcaliburDIY.com
2 - DOWN SPOUT RING
Grinder
Head
A
C D
Opening
6