English
ESPRESSIONE coffee makers are for those who know how to enjoy the pleasures of life,
beginning with a good cup of coffee. The innovative Thermocream® device gives you hot
and rich coffee shop espresso, right at home. In fact, Thermocream® is designed with a
filter that ensures coffee brewing at constant pressure.
In this manner it is possible to enjoy very creamy coffee with an intense aroma and full-
bodied flavor, without the necessity of pressing energetically, and by using whatever type
of blend as long as it is not too fine.
Espressione coffee makers also satisfy cappuccino lovers as they have a MAXI CAP-
PUCCINO attachment that allows you to obtain a rich and dense froth in less than ten
seconds. Furthermore, the coffee is ready instantly with Espressione makers as they
have an auto-priming system which allows a cup of coffee to be made immediately, even
if the maker has not been used for a long time or after filling the water tank. Enjoy your
coffee with CAFE' RETRÓ ESPRESSIONE!
DESCRIPTION OF THE CONTROLS AND COMPONENTS
A. On/off switch
Lifted position (
Lowered position: coffee maker off
B. On warning light
C. Coffee brewer/steam switch
Central position: standby
Position (
): steam distribution
Position (
): coffee distribution
D. Heating unit warning light
E. Heating unit thermostat (ºC and ºF)
F.
Steam lever
G. Water collector tray
H. MAXI CAPPUCCINO attachment and wand for water and steam supply
I.
Removable water tank
J.
Cord + plug
K. Removable coffee cup storage
L.
Filter ring
M. Thermocream® disc
N. Thermocream® filter
O. Measure
P.
Coffee presser
Q. Pod ring
R. Cord housing
Check that the main voltage is the same as the one indicated on the appliance plate containing
technical information. Place the coffee maker on a flat surface. Fill the tank with cold water (23
ounces/0.7 liters MAXIMUM), then reinsert it carefully in its housing. Remove the cord from its
housing (R) and unwind it completely. Insert the plug in a socket which must be equipped with
a ground connection.
) coffee maker on
PRELIMINARY PHASES FOR USE
2
/
1
2