Maxon TRUTALK WX-80 SAME Instrucciones De Uso página 14

VIII. PROGRAMMING YOUR WX-80
Factory Default Programming, Continued
adjust the broadcast volume to desired level.
4. Press the number keys, in sequence, from 1 through
7 to find the broadcast channel for your area, by
listening for the strongest signal. Re-adjust the
volume level if necessary, then listen briefly to
the announcement message to ensure information
about your local area is being broadcast. If another
channel seems strong, go to that channel and
listen to its broadcast. Choose the channel which
best represents information for your location.
Channel Frequency
1 162.550 MHz
2 162.400
3 162.475
4 162.425
5. When you have selected the best channel for your
location, push the YES button to store your
selection and advance to the next programming
step, "Setting the Alert Type", or push the OFF /
PROGRAM key for 2 seconds to store the
selection and set mode to operate. The current
alert status (WEATHER ALRT ON or WEATHER
ALRT OFF) appears.
, Continued
Channel Frequency
5 162.450
6 162.500
7 162.525
11