Replacing The Batteries; Maintenance And Care - Sonel CMP-3kR Manual De Uso

WARNING
To avoid electric shock, do not use the meter if the bat-
tery compartment cover is not in place or is not
properly fastened.
CMP-3kR is powered by 2 AA 1.5 V batteries. It is recommend-
ed to use alkaline batteries.
To replace the battery:

turn OFF the meter,

disconnect the flexible probe,

unscrew 1 screw fixing the compartment cover,

remove the cover,

remove the batteries and insert a new ones, observing the polarity,

put on the cover and tighten the fixing screw.
 While performing the measurements with the battery
symbol displayed, the user must be aware of additional
measurement uncertainties or unstable operation of the
device.
 If the meter does not work properly, check the batteries
in order to ensure that they are proper condition and
properly installed in the device.
The digital multimeter has been designed for many years of re-
liable use, provided that the following recommendations are ob-
served for its maintenance and care:
1. THE METER MUST BE DRY. Wipe the dampened meter.
2. THE METER MUST BE USED AND STORED IN NORMAL
TEMPERATURES. Extreme temperatures may shorten the life
of electronic components and distort or melt plastic parts.
36

7 Replacing the batteries

8 Maintenance and care

CMP-3kR – USER MANUAL