Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1. Use your WIFI camera
First insert a micro SD or micro SDHC card, as shown in the right figure:
A high-speed card of Class 6 or above is recommended, and a Class 10 card is needed for
video recording in professional mode.
Be sure to turn off the video camera before a card is inserted or taken out.
2. Power on/off
Power on: Press and hold Power key
for about 2 seconds and release it, accompanied
by a sound of the buzzer, the LCD screen will be started (video recording mode is started
by default), and the working indicator in red/Busy indicator will be normally on.
Power saving mode: The device will enter power saving mode when it is in an idle state for
one minute (default setting of the system) without any operation, LCD display will be
turned off automatically. And it can be activated by pressing any key after it is turned off.
Publicidad
Tabla de contenido
