11.Operating scenario 2:
Two person intercom, and pairing to cellphone + bluetooth
gps + speed detector or radio
Rider Cellphone
Rider GPS
Passenger Procedure:
Step 1: switch rider headset to search mode, passenger headset to
pairing mode. When both headset stop red+blue light flashes, they
are paired.
Step 2: switch rider headset to pairing mode, cellphone search this
M1-S PRO and pair it up.
Step 3: keep riders headset in pairing mode, use bluetooth gps to
search rider's headset and pair it up.
Step 4: use 2.5mm to 3.5mm aux in to connect speed detector or
radio to M1 -S PRO , and switch M1-S PRO to Wire Connecting, all
audio integrade complete.
Please read STEP 9. For Wire Connecting.
Rider Headset
Rider Speed Detector
14
PRO
Passenger Headset
PRO