Intended Use - ResMed AirFit F30i Guia Del Usuario

ENGLISH
Thank you for choosing the AirFit
cushion that seals under the nose and around the mouth, and a frame
with a tube connection above the head. To breathe fresh air, this mask
features vent holes in the cushion and elbow, and valves in the frame.
Elbow
A
Frame
B
C Cushion
D Headgear
1 Vent holes (cushion)
2 Vent holes (elbow)
3 Side button

Intended Use

The AirFit F30i mask is intended to be used by patients weighing more
than 66 lb (30 kg) who have been prescribed non-invasive positive airway
pressure (PAP) therapy such as CPAP or bi-level therapy. The mask is
intended for single patient re-use in the home and multi-patient re-use in
the hospital/institutional environment.
™ F30i full face mask. This mask uses a
Elbow ring
4
Anti-Asphyxia valve (inside the left
5
and right of frame connector)
6 Frame connector
7 Magnetic clip
8 Lower headgear strap
9 Upper headgear strap
English 1