Troubleshooting - KitchenAid KHBC412 Instrucciones

TROUBLESHOOTING

If the Commercial Immersion Blender has stopped working, check
for the following:
Unit has been unplugged
• Release the Power/Pulse Trigger.
• Check the power supply.
Machine has overheated
• Release the Power/Pulse Trigger.
• Unplug the unit.
• Wait a few minutes for the motor to cool
down and the thermal safety mechanism
to reset.
Unknown cause
• Release the Power/Pulse Trigger.
• Unplug the unit.
• Restart the Commercial Immersion
Blender as instructed in "Operating
the Commercial Immersion Blender".
• Restart the Commercial Immersion
Blender as instructed in "Operating
the Commercial Immersion Blender".
• Check the following:
- electrical plug for damage.
- power cord for cuts or other damage.
- drive shaft for freedom of rotation.
(check by removing the attachment arm
and rotating the shaft manually).
- blades for freedom of movement.
(food may be lodged between blades
and plastic guard.)
IMPORTANT: If a piece of food becomes
lodged in the guard surrounding the blade,
follow these instructions:
1. Release the Power/Pulse Trigger and
unplug the Commercial Immersion
Blender.
2. Use a spatula to remove the food
lodged in the plastic guard. Do not use
your fingers to remove lodged food.
3. Plug the Commercial Immersion
Blender back into the electrical outlet
and resume operation.
15