Lifting Instructions - RIDGID MONSTER BOX 1000 Manual De Instrucciones Y Repuestos

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
Preparing MONSTER BOX™ for lifting by crane:
Preparing the MONSTER BOX for lifting by crane:
For SAFE rigging and lifting practices, refer to ASME B30 series; Safety Standard for Cableways, Cranes,
Derricks, Hoists, Hooks, Jacks, and Slings. (See www.asme.org
Always inspect the lifting rings to ensure they are in proper working order and are not damaged or corroded.
Replace any damaged rings prior to rigging.
Secure doors or lids of box to prevent unwanted opening or spilling of contents.
Plan route of lifted box so that it does not pass over persons. Clear area of persons after box is connected and
tension is established.
LIFT ONLY by lifting lugs, DO NOT lift by handles, they are not designed to support heavy loads.
Rig for lifting using all (4) available lifting rings. The load rating is based on using all (4) lifting rings.
STEPS:
1. Ensure all internal items are secured and not allowed to shift
during transport.
2. Close lid and or secure all doors in a locked position prior to
lifting.
3. Cable tie, hook, or sling with straps along all (4) lifting lugs,
as shown.
4. Maintain all rigging practices in accordance with ASME B30.
See picture to right for typical rigging.
5. Ensure all lifting lugs are uninpinged and can align freely
towards the center of the unit.
6. Avoid any sudden jerks or rapid falls while moving the
MONSTER BOX by crane.
7. NEVER LIFT unit over persons; ALWAYS clear area before
moving MONSTER BOX by crane.
8. Use slings long enough so angle of loading is greater than
40 degrees"
Recommended Load ratings:
Refer to Table 1 for allowable load rating of MONSTER BOX for
lifting by crane as well as recommended storage weight capacities
on shelving.
Table 1
Model 1000
Lift by
Not to exceed
crane
2500 lbs./1000 kg
(including conainer
weight)
Shelving
30 lbs./sq. ft.
146kg/m
2
Door Shelv-
N/A
ing
Weight box
405lbs/184 kg

LIFTING INSTRUCTIONS

WARNING
Model 1010
Model 1020
Not to exceed
Not to exceed
2500 lbs/1000 kg.
2500 lbs./1000 kg
(including conainer
(including conainer
weight)
weight)
N/A
30 lbs./sq. ft.
146kg/m
N/A
60 lbs./27 kg (each
door, any more may
incur tipping an empty
container)
285lbs/130 kg
400lbs/182kg
and European Directive 98/37/EC (Machinery).)
Refer to ASME B30 and European
Directive 98/37/EC (Machinery) for
2
3
proper rigging techniques
min 40°
DO NOT
Crane-lift by
handles

Publicidad

Tabla de contenido
loading

Productos relacionados para RIDGID MONSTER BOX 1000

Este manual también es adecuado para:

Monster box 1010Monster box 1020

Tabla de contenido