Publicidad
Idiomas disponibles
Idiomas disponibles
2) Use a drill (bit 12) to make the marked holes. The holes should be 60 mm deep (step
3). Fill the holes with paste (not included) and insert the cannula. Refill the cannula
with the paste as well and after that insert fastening studs of 10 mm of diameter.
The studs should reach the very bottom of the cannula and stand out 20 mm from
the wall in order to hang the bracket (piece n°2).
º
º
Anchorage
20 mm
Illustration2.
º
º
Wall bracket
Plan for fixing the bracket
4
Wall
Publicidad
