Portable Ice Maker
HELPFUL HINTS
1. If a power failure occurs, the power cord is disconnected, or the ON/OFF
button pressed during an ice making cycle, small chips may form and lodge in
the automatic shovel causing it to jam. UNPLUG the unit and gently push the
shovel to the rear of the cabinet and gently remove the ice chips. Plug the
unit in and press ON/OFF to re-start the cycle.
2. Make sure the ice tray is sitting properly in the unit or the ice shovel will not be
able to deposit the ice cubes.
3. If the ADD WATER light stays on after filling the reservoir, turn the unit off and
restart it.
4. If the ice cubes are too large and have pieces sticking to it, the water
temperature could be too cold. Press the SELECT button to change to the S
(small) ice cubes.
5. If all the lights blink simultaneously the water tray may be blocked by an ice
cube. UNPLUG the unit and remove the ice cube. Restart the unit.
8
help@myproduct.care
Helpful Hints
AFTER SALES SUPPORT
888-367-7373