Ford F-Serie Manual De Instrucciones página 189

THE FOLLOWING ARE COMMON BETWEEN ALL CAB STYLES
• Black dots represent the location of the blind rivets (W702512-S900C).
• Four (4) rivets (two (2) per side) to dash and torque box.
• Four (4) rivets (two (2) per side) between the sled runner and #2 crossmember.
• Ten (10) rivets (five (5) per side) between torque box and torque box extension.
• Eight (8) rivets (four (4) per side) between torque box and sled runner.
• Eight (8) rivets (four (4) per side) between torque box extension and #1 crossmember.
• Five (5) rivets between center floor reinforcement and #2 crossmember.
• Ten (10) rivets (five (5) per side) between sled runner and #1 crossmember.
• Four (4) rivets (two (2) per side) between sled runner and #1 crossmember, (Crew Cab only).
• Two (2) rivets between center floor reinforcement and #1 crossmember.
Black squares represent the location of the blind rivets (W708777-S900C)
•
• Two (2) rivets (one 1 per side) between the tunnel and the dash and torque box.
• Sixteen (16) rivets (eight (8) per side) between the side sill and #1 crossmember.
• Six (6) rivets (three (3) per side) between the side sill and torque box.
• Twelve (12) rivets (six (6) per side) between the side sill and torque box extension.
CPR © 2016 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
4-16
FIGURE 1
SKFL34-1510692-AD
F-SERIES ALL CABS FRONT FLOOR
CROSSMEMBER INSTALLATION -
SERVICE KIT INSTRUCTIONS
SHEET 4 OF 5