jbc HDE-B Serie Manual Del Usuario página 6

Operation
The JBC Exclusive Heating System
This revolutionary technology is able to recover tip temperature extremely quickly. It allows the user
to work at a lower temperature and improve the quality of soldering. The tip temperature is further
reduced thanks to the Sleep and Hibernation modes which increase the tip life by 5.
1. Work 2. Sleep
When the tool is lifted from the When the tool is in the stand,
stand the tip will heat up to the the temperature falls to
selected temperature. 180ºC / 360ºF (preset sleep
temperature).
17:14
T470
380
ºC
Sleep
Tool in the stand
Selected 380ºC
Actual Temp. 180ºC
Delay to hibernation: 29:30
Power Port
45% 1
Tools Menu:
Tools Menu:
· Set temperature limits · Set Sleep temperature
· Select temperature levels · Set Sleep delay
(from 0 to 9 min or no Sleep)
10
3. Hibernation
Long time in
the stand
After longer periods of
inactivity (pre-set to 30 min.),
the power is cut off and the
tool cools down to room
temperature.
17:14 17:14
T470 T470
Hibernation
Actual Temp. 25ºC
Port
1
Tools Menu:
· Set Hibernation delay
(from 0 to 60 min or no
hibernation)
Work Screen
The HDE offers an intuitive user interface which provides quick access to station parameters.
Status bar
Power
indicator
Displayed if
temperature
levels are
activated
Menu Options
Press INFO for each parameter description.
Port
1
Station
Peripherals Graphics
17:14
T470
380
ºC
Temp. Levels
250 380 400
Power
45%
System notifications (Status Bar)
USB flash drive is connected.
Station is controlled by a PC.
Station is controlled by a robot.
Tools Counters
Station software update.
Press INFO to start the process.
Warning.
Press INFO for failure description.
Error. Press INFO for failure description,
Reset the type of error and how to proceed.
w w w.jbctools.com
Tool
in use
Port
1
Station
Information
Change
port
11