Bayside Furnishings MARCD-PC-N Instrucciones De Montaje página 3

FURNITURE POWER DISTRIBUTION CENTER
IMPORTANT SAFETY INSTRUCTIONS
Carefully read all instructions for installing and operating fixture.
IF YOU HAVE ANY QUESTIONS REGARDING THE PROPER INSTALLATION
CONSULT A QUALIFIED ELECTRICIAN.
INJURY TO PERSONS, PLEASE FOLLOW THE NEXT:
• Use only insulated staples or plastic ties (not included) to secure the cords.
• Route and secure cords so that they will not be pinched or damaged when the desk is pushed to the wall.
• Make sure cord is not pinched between desk and floor.
• Use the unit for indoor use only.
• Do not use an extension cord to connect this unit to a wall outlet.
• Use power strip with integral over current protection to supply other electrical devices or accessories in
desk.
• This unit must be plugged into a properly grounded outlet.
• The socket-outlet should be installed near the equipment and should be easily accessible.
• Maximum load of connected equipment cannot exceed a total of 12 amps and 120 volts.
• Do not open or disassemble this unit for any reason.
SAVE THESE INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR
3
E