Bayside Furnishings MARCD-PC-N Instrucciones De Montaje página 6

1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Using the pilot holes as a guide, attach 3 Cord Clips (EE) to the back post of Left Leg (B) with the
hooks pointing towards the same direction, using 2 Wood Screws (DD) per clip.
AA BB
C
3. Place the Desk Top (A) upside down on a level and protective surface. Pull the small drawers all the
way forward for the following steps (remove the drawers completely, if necessary).
4. Align and attach Left and Right Legs (B and C) to the Desk Top (A) by using the Bolts (AA) with
Lock Washers (BB) and Flat Washers (CC) through the drilled holes on apron side panels and screw
into place. Tighten the bolts with the enclosed hex-key wrench.
Assembly Instructions
B
CC
A
CC
AA BB
B/C
6
DD
EE
B
B
E