GLÄSS MySpa 226 Manual Del Usuario página 29

MySpa 213/165
Point for power intlet (Cable Min. L=200 cm).*It changes according to the type of the panel.
** tolerance +1 cm
DRAIN: connection with joint 3/4" M or joint (delivered with the spa) for hose Ø16.
NOTE: All dimensions are approximate; measure your spa before making critical design or
pathway decisions.
NOTE: Manufacturer recommends that the MySpa 213/165 be installed on a minimum 4" thick
reinforced concrete pad or structurally sound deck able to support the "dead weight" found in
the spa specification chart.
WARNING: The MySpa 213/165 must not be shimmed in any manner.
Dimensions
DRAIN
165 cm
161.8 cm** (built-in)
155 cm
BOTTOM VIEW
6.5 cm
Air vents
DO NOT BLOCK!
6.5 cm
Air vents
INSPECTION PANEL SIDE
29
FRONT
VIEW
3.8 cm