PolyVision a3 CeramicSteel Sans Manual Del Usuario página 6

Pizarra montada a la pared, sin marco, para borrado en seco y aplicaciones no sísmicas
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
Step Six
·
Remove tape liner from retention strap. Firmly press against the back of the panel while bending
the top portion of the retention strap onto the top edge of the panel. Make sure the tab fits as flat as
possible on the panel edge.
Installation of PolyVision a
CeramicSteel Sans is complete.
3
Doc # 81815 | Rev B | Page 10 of 32
Collaborative Products Warranty
CeramicSteel Surface: Forever warranty
PolyVision warrants that all porcelain-enameled surfaces and/or products made with e
(Premium Writing Surfaces) or a
™ CeramicSteel (Collaborative Products) will retain its writing and
3
erasing qualities and maintain its gloss variance and color consistency for the life of the building or for
as long as the product is in use, whichever comes first.
Panel Construction: 10 year limited warranty
PolyVision warrants that our panels, under normal atmospheric conditions and when sealed from
moisture, will not delaminate from the substrate or warp for a period of 10 years.
Should any failure to conform to this warranty become apparent, then, upon written notice from
the customer, PolyVision, at its option, will correct such nonconformity by repair or replacement.
Correction in the manner provided above shall constitute a fulfillment of all liabilities of PolyVision with
respect to the quality of the CeramicSteel. The warranty is applicable only under normal usage and
maintenance and does not cover defects caused by improper handling, vandalism or abuse, or arising
from failure to follow PolyVision's instructions and recommendations for maintenance.
The warranty is voided if any modifications are made to the products by the customer or other trades
with or without PolyVision's written consent or prior knowledge. The warranty does not include the cost
of removal or reinstallation. This warranty is effective as of June 4, 2009, and supersedes the terms and
conditions of all prior surface warranties issued to the customer by PolyVision.
This limited warranty is the sole remedy for product defects and no other express or implied warranty
is provided, including but not limited to any implied warranties of merchantability or fitness for a
particular purpose. PolyVision shall not be liable for consequential or incidental damages arising from
any product defect.
Doc # 81815 | Rev B | Page 11 of 32
™ CeramicSteel
3

Publicidad

Tabla de contenido
loading

Productos relacionados para PolyVision a3 CeramicSteel Sans

Tabla de contenido