Nuisance Delete; Voting - Tait TM81 Serie Guía Del Usario

radio unmutes and you can hear the call. Scanning resumes
when the channel is no longer busy or the signalling is no
longer valid.
One or two priority scan channels may be set. These channels
are scanned more often than other channels and are scanned
periodically when a non-priority channel is busy.
Activating scanning
1
2
3

Nuisance delete

If a member channel of the scan group is busy for a long time
and you do not wish to hear the conversation, you can use
the function key assigned to nuisance delete to temporarily
delete it from the scan group.
Alternatively, press and hold the scanning function key.
When the scan group is next selected, the deleted channel is
again part of the scan group.
Note: Priority channels cannot be removed from the scan

Voting

A group of channels carrying the same traffic can be grouped
together in a voting group. When you press the function key
assigned to voting, the best communication channel is
always selected for you to use.
Nuisance delete
If you wish to delete one of the channels from the voting
group, you can use the function key assigned to nuisance
delete to temporarily delete it from the voting group.
20 Basic operation
Place the microphone on the microphone clip.
Press the function key assigned to scanning. The amber
LED glows to show that the radio is scanning.
Press the scanning function key again to cancel scanning,
and the amber LED no longer glows.
group using the nuisance delete function.