koban KRB-01 Instrucciones De Operación página 14

EN
1 INFORMACIÓN DE SEGURIDAD
• Read the following safety information carefully before attempting to operate or repair the meter.
• To avoid damage to the instrument, do not apply signals that exceed the maximum limits indicated in
the technical specifications tables.
• Do not use the meter or test leads if they appear damaged. Be very careful when working around
bare conductors or bus bars.
• Accidental contact with the driver could cause an electric shock.
• Use the meter only as specified in this manual; otherwise, the protection provided by the meter may
be affected.
• Read the operating instructions before use and follow all safety information.
Security symbols:
Caution, consult this manual before using the meter.
Dangerous voltages.
The meter is protected by double insulation or reinforced insulation.
When making repairs, use only the specified replacement parts.
CE Compliance with EN-61010-1
2 OPERATING INSTRUCTIONS
Link the test line
Check the condition of the cables:
Before pressing the "test" button, certify the status of 3 led
Led light P-E
Led light P-N
Inverted not illuminated P-N
If the status of the indicator light is not, do not test and check the cables again.
LOOP RESISTANCE METER
KRB-01
14 / 26