Package Includes - WOOX R4957 Guia De Inicio Rapido

English

Package includes:

1. 1 x Smart video doorbell
2. 1x Chime
3. 2 x Rechargeable lithium battery
4. 1 x Screw tool kit
5. 1 x Micro USB cable
6. 1 x User manual
Requirement to use
1. Woox home app
2. WiFi router: 2.4GHz channel
Install the doorbell
1. Remove the mounting bracket from the body of doorbell by
pullingit down.
2. Mark the position of the mounting holes on the wall using the
mounting bracket as a template. Drill out the mounting holes
taking care to avoid any joists, electrical cables or water/gas pipes
that may be hidden beneath the surface.
3. Once the holes have been drilled out insert the rawl plugs into
the holes and fix the wall plate to the wall using the correct
mounting screws provided.
4. Before placing the body of the Wi-Fi doorbell on the wall plate,
pull the insulation sheet from battery compartment of the
doorbell. The unit should switch on and be ready for pairing.
5. It is recommended that the pairing process is complete before
fully affixing the product to the wall as the unit may need
resetting during this process. If you wish to register on the Woox
home App and pair the device before mounting the product to
the wall, skip to the next section of the manual. It is also worth
noting that the installation location should be in a suitable area
where a 50% or more Wi-Fi signal can be established.
6. Once pairing is complete mount the body of the Wi-Fi doorbell
to the wall plate and tighten the retaining screw so the body and
wall plate are held firmly together.
3