EINHELL TE-AP 750 E Manual De Instrucciones página 23

circumstances.
f) Wear suitable work clothes. Do not wear
loose clothing or jewellery. Keep hair, clo-
thes and gloves away from moving parts.
Loose clothing, jewellery or long hair can get
trapped in moving parts.
g) If vacuuming devices and draining de-
vices can be fi tted, make sure that these
are correctly attached and correctly used.
The use of a dust extraction system can redu-
ce the danger posed by dust.
4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the
correct tool for your work. You will be able
to work better and more safely within the gi-
ven performance boundaries.
b) Do not use an electric tool with a defec-
tive switch. An electric tool that cannot be
switched on or off is dangerous and must be
repaired.
c) Pull the plug out of the socket and/or
remove the battery before making any ad-
justments to the appliance, changing ac-
cessories or put the appliance down. This
safety measure prevents starting the electric
tool unintentionally.
d) Keep unused electric tools out of the
reach of children. Do not allow people
who are not familiar with the appliance or
who have not read these instructions to
use the appliance. Electric tools are dange-
rous if they are used by inexperienced people.
e) Clean your electric tool carefully. Check
whether moving parts are functioning
properly and not jamming, whether parts
are broken or damaged enough that the
functioning of this electric tool is aff ec-
ted. Damaged parts must be repaired be-
fore using the appliance. Many accidents
are caused by badly maintained electric tools.
f) Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
g) Make sure to use electric tools, accesso-
ries, spare parts, etc. in accordance with
these instructions. Take the conditions
in your work area and the job to perform
into account. Using electric tools for any
purpose other than the one for which they are
intended can lead to dangerous situations.
Anl_SA_TE_AP_750_E_SPK8.indb 23 Anl_SA_TE_AP_750_E_SPK8.indb 23
GB
5. Service
a) Have your electric tool repaired only by
trained personnel and/or the authorized
service agent, using only genuine spare
parts. This will ensure that your electric tool
remains safe to use.
Universal Cordless Saw
•
Hold the equipment by the insulated handles
when carrying out work during which the
plug-in tool could strike concealed power
cables. Contact with a live cable may also
make the metal parts of the equipment live
and cause an electric shock.
•
Keep the saw in a safe place and out of the
reach of children.
•
When sawing, always wear safety goggles,
protective gloves and ear muffs; use a dust
mask on dusty jobs.
•
Never leave any keys or adjustment spanners
in position on the saw. Before switching on,
check that all keys and adjustment spanners
have been removed.
•
Secure the workpiece (with a clamp) so that it
cannot slip.
•
It is prohibited to use the saw on asbestos
materials.
•
Please note the accident prevention regulati-
ons in force in your country.
•
Use only original spare parts.
•
Repairs are to be carried out by qualified
electricians only.
•
The level of noise at the workplace may ex-
ceed 85 dB(A). In this case you will need to
introduce noise protection measures for the
user.
•
Make sure of your footing. Avoid abnormal
working positions.
•
Keep your electric tool out of the rain. Never
use electric tools in wet or damp conditions,
and never use them near inflammable liquids.
•
Keep your workplace tidy.
•
Wear suitable clothing. Never wear loosefit-
ting clothes or jewelry. Use a hair-net on long
hair.
•
For your own safety, use only the
manufacturer's accessories and attachments.
•
Use only sharp saw blades that are in perfect
condition. Replace bent and cracked saw bla-
des immediately.
•
After switching off the saw, do not press
against the side of the blade to bring it to a
halt.
•
Always cut at a steady rate of progress. This
will prevent accidents and prolong the life of
- 23 -
18.02.2019 13:43:12 18.02.2019 13:43:12