Package Contents; Hardware Installation - Grandstream GWN7605 Guía De Instalación Rápida

EN
OVERVIEW
The GWN7605 is an affordable 802.11ac Wave-2 Wi-Fi access point
ideal for small to medium wireless network deployments with medium
user density. It offers dual-band 2x2:2 MU-MIMO with beam-forming
technology and a sophisticated antenna design for maximum network
throughput and expanded Wi-Fi coverage range. To ensure easy
installation and management, the GWN7605 uses a controller-less
distributed network management design in which the controller is
embedded within the product's web user interface. The GWN7605 is
also supported by GWN.Cloud and GWN Manager, Grandstream's cloud
and on-premise Wi-Fi management platforms. It is the ideal Wi-Fi AP
for voice-over-Wi-Fi deployments and offers a seamless connection with
Grandstream's Wi-Fi-capable IP phones. With support for advanced
QoS, low-latency real-time applications, mesh networks, captive portals,
100+ concurrent clients per AP and dual Gigabit network ports with PoE/
PoE+, the GWN7605 is scalable Wi-Fi solution for deployments such as
retail locations, restaurants, small offices and more.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of 0 °C to 40
°C for operating and -10 °C to 60 °C for storage.
• Do not expose the GWN7605 to environments outside of the following
humidity range: 10-90% RH (non-condensing).
• Do not power cycle your GWN7605 during system boot up or firmware
upgrade. You may corrupt firmware images and cause the unit to
malfunction.

PACKAGE CONTENTS

×
1 GWN7605
Access Point
×
3 Screw
×
(PM 3 50)
×
×
1 Mounting 1 Ceiling
Mounting Bracket
Bracket
×
3 Screw
×
3 Plastic Expansion
×
Bolt
(PA 3.5 20)
~ 1 ~
×
× 1 Quick Installation Guide
3 M3 NUT
GWN7605 PORTS
Port Description
NET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE/PoE+.
NET Ethernet RJ45 port (10/100/1000Mbps) to your router
or another GWN76xx.
RESET Factory reset button.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7605
GWN7605 can be powered on using PoE/PoE+ switch using following
steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7605.
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
Network Port

HARDWARE INSTALLATION

GWN7605 can be mounted on the wall or ceiling, Please refer to the
following steps for the appropriate installation.
~ 2 ~
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch