Brinly FB-42RY El Manual Del Propietario página 9

================================================================================================
Assembly Step 5
Blade Assembly
3. Install bolt and nut stops to the blade ribs (10) using:
- 4 Hex Head Bolts (28) – 3/8" x 3/4"
x
- 4 Lock Nuts (41) * – 3/8"
x
*Note: Nuts need to be on the outside
edges of the blade ribs.
9/16" Wrench & Socket
4. Set blade aside.
Assembly Step 6
Push Arm Assembly
1. Attach upper push bracket (7)
to lower push bracket (6) and bottom
plate (13) using:
- 2 Hex Head Bolts (30) – 3/8" x 2"
x
- 2 Nylon Lock Nuts (41) – 3/8"
x
9/16" Wrench & Socket
**Exterior circumference of washers can vary.
These dimensions are a measurement of the
internal diameter of the washer.
ASSEMBLY
10
41
41
30
7
6
13
41
9
10
28
41
41
28
30
41
1/2"
3/8"
5/16"
1/4"
5"
4"
3"
2"
1"
0"
1018348-B