ANSMANN POWERBANK 5.2 Manual De Instrucciones página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
ted devices and could cause injury to the user!
If you have any question, please contact your lo-
cal retailer or our service department.
HOW TO USE
How to charge the ANSMANN POWERBANK
Connect the Micro-USB plug of the USB cable to the ANS-
MANN POWERBANK and the USB plug to the USB socket of a
computer or a USB charger with min. 1A output current. The
charging process starts automatically. During the charging
process up to 5 flashing LEDs indicate the current charge
level of the ANSMANN POWERBANK. When the ANSMANN POW-
ERBANK is fully charged, all 5 LEDs light up constantly.
Capacity indication
Please press the power button to check the remaining power.
5 LED light up
4 LED light up
3 LED light up
2 LED light up
1 LED lights up
No light on
Status indicator
How to charge other devices:
To charge a device, e.g. a smartphone, please use the inclu-
ded USB cable (if the Micro-USB plug fits in your mobile de-
vice) or the original charging cable for your device. Connect
the USB plug of the cable to the ANSMANN POWERBANK and
the other end to your device. The charging process starts
automatically, which is indicated by the flashing LED on the
right side of the power button.
To check the remaining capacity of the ANSMANN POWERBANK
during the charging process you can press the power button
(see above).
Please disconnect your device from the ANSMANN POWER-
BANK when it is fully charged. The ANSMANN
POWERBANK will turn off automatically.
SPECIFICATIONS
1. Cell type:
2. Capacity:
3. Input:
4. Output:
5. Accessories:
6. Working temperature: -10°C to +50°C
7. Charging time:
Deutsch |
English
Italiano | Nederlands | Dansk | Slovenščina | Čeština
Capacity is 80% - 100%
Capacity is 60% - 80%
Capacity is 40% - 60%
Capacity is 20% - 40%
Capacity is 1% - 20%
The ANSMANN POWERBANK is
completely discharged. Please
recharge the ANSMANN POWERBANK
immediately.
Power button
Li-Po battery pack
5200mAh / 19Wh
Micro-USB - DC 5V / 1000mA
USB - DC 5V / 1500mA (max.)
Charging cable (USB to Micro-USB)
approx. 6 hours
| Français | Español | Português | Svenska
Slovenský | Polski
Input
Output

Publicidad

Tabla de contenido
loading

Tabla de contenido