Appendix; Maintenance; Updating The Firmware; Order Numbers - Festo Tec2Screen Manual De Instrucciones

Appendix

Maintenance

Clean the housing using a clean, dry cloth if required.

Updating the firmware

1. Start iEasyLab.
2. Select the menu option "Firmware Update"
3. Press "Update"
4. In the following window you will find the latest firmware files.
5. The system will check whether the firmware used for the base is older than the latest available
firmware.
If it is, the update process can be started by pressing the "Update" button.
The update may take some time. Please do not switch off the device.
6. The message "Base Ready" indicates that the update process is complete.

Order numbers

Component
Base
Analog Input Connect
Analog Output Connect
Digital I/O Connect
Multimeter Connect
Power Connect
SysLink Connect
Tec2Screen ® Lock
Festo Didactic 8034153
Order no.
8028156
8028147
8028148
8028146
8028150
8028149
8028152
8043803
49