Chauvet Motion Set LED Guía De Referencia Rápida página 3

EN
Product
Description
Overview
AC Power
Fuse
Replacement
The MotionSet™ LED includes a MotionDrape™ LED, a MotionFaçade™
LED, one MotionSet™ LED Controller to control both drapes, a power cord,
and replacement LEDs. While the MotionFaçade™ LED is a DJ front-board
LED skirt and the MotionDrape™ LED is a DJ backdrop, both have high-
output tri-color SMD LEDs with 30 built-in patterns. The MotionSet™ LED
has an 8-channel DMX personality. There are also the options for Sound-
Active mode and auto programs for non-DMX control.
Button Menu
Power In
Fuse Holder
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
LED Display
DMX In/Out
On/Off Switch
3
MotionSet™ LED QRG
Front Panel
MotionDrape™
Input
MotionFaçade™
Input
Top Panel