Cord Storage; Insert Hose; To Store Your Accessories - RIDGID WD1245 Manual Del Usuario

SP6439-3 E S 8/29/06
Wet/Dry Vac Assembly (continued)
Simply, wrap the power cord around the

Cord Storage

power head and snap the connector on
the plug to a wrap of the cord.
WD1635 Shown
Cord Wrap
Area
Blower
Port
Power
Cord
Drum
Caster Feet
w/Accessory Storage

To Store Your Accessories

1. Slide extension wands and acces-
sories over the rings on the caster feet.
2. To remove wands and accessories,
lightly rotate and pull upward.
3. Accessories may also be stored in the
rings provided on lid.
2:12 PM Page 8
Insert the push button end of the "Tug-a-

Insert Hose

Long" hose into the inlet of the vac. The
hose should snap into place. To remove
the hose from the vac, press the release
button in the hose assembly and pull the
hose out of the vac inlet, as shown.
On-Off
Switch
Pull Handle
Hose
Caster
Drain
Cap
8
Release Button