Connecting To External Av Signal Source - Odys MultiFlat 20 DVD Manual Del Usuario

Prevent hearing damage and keep the volume in an acceptable range. Turn the volume
down before connecting the headphones; after they are connected, slowly turn the
volume up to the desired level.

4.3 Connecting to External AV Signal Source

Use the audio and video cable to connect the input jacks on the rear panel of the unit to the external
AV signal source.
Connect the unit and the external AV signal source to the respective jacks with the S-Video cable.
Ensure that you observe the color cord when connecting audio and video cables.
After connection, turn on the power of the unit and the external AV signal source. Then press the
SOURCE button to change to COMPOSITE or S-Video mode so that the AV signal can be shown.
The L/R audio input jacks can be used in the both COMPOSITE and S-VIDEO modes.
ODYS MultiFlat 20" DVD
15