Unscheduled Maintenance; Requesting Technical Assistance - Zhermack DOUBLEMIX Manual De Usario

MAINTENANCE AND USE MANUAL
Unscheduled maintenance includes repair of any accidental breakage and replacement of worn or
malfunctioning parts.
All electrical and mechanical work must only be carried out by an authorised
Zhermack maintenance technician.
Modifications which alter the machine characteristics from a safety and risk
prevention viewpoint may only be made by the Manufacturer who shall then issue
a certificate stating that the machine conforms to safety standards. Therefore any
modification or maintenance tasks not actually described in this manual are to be
considered forbidden. If the machine is modified, tampered with or repaired by
unauthorised personnel or non-original spare parts are used the manufacturer is
relieved of all responsibility. If a maintenance task is required but is not described
in this manual you must contact an Authorised Servicing Centre.
Should the machine need to be restarted after a particularly long period of inactivity proceed as
described in Chapter 6 (First-time Use).
If there are any faults or malfunctions proceed as described in Chapter 9 (Troubleshooting). If
the problem persists or is not covered by the information in this chapter contact your Authorised
Servicing Centre immediately.
To obtain technical assistance choose one of the following options:
1. contact your Authorised Servicing Centre.
2. telephone the Zhermack Customer Assistance Service on the number +39 0425.597.611 and
proceed as follows: give personal data (e.g. address and telephone n.), state the information on the
equipment ID plate (see paragraph 3.3) and explain the problem clearly.
3.
fax all the above information and a properly filled out ID Form (see Appendix 2) to
+39 0425.53.596.
DOUBLEMIX
EN
RESTARTING AFTER A LONG PERIOD OF INACTIVITY

REQUESTING TECHNICAL ASSISTANCE

UNSCHEDULED MAINTENANCE

8.3
8.4
8.5
117 of 188