Operating Elements; How To Plug The Instrument In - MACHEREY-NAGEL NANOCOLOR TIC-Ex Manual De Usario

6.4 Operating elements

Operating element
1 Start button
2 Stop button
3 LED
4 Removal mechanism
5 Lowering mechanism
6 Cuvette holder
7 Power plug
8 On/Off switch (I/O)
4
6
1
Fig. 1: Front view

6.5 How to plug the instrument in

Three adapters are provided for connecting the power pack to the available mains connec‑
tion. The adapter matching the mains connection is plugged on to the power pack. After plug‑
ging the power pack cable into the jack "DC 9 V" (chapter 6.4 7 ) and connecting the power
pack to the power socket, the NANOCOLOR
!
Warning: Electrical danger
The use of NANOCOLOR
consider the applicable safety instructions. Prior to each use make sure that the
mains adapter and the power connection do not show any obvious defects, like cable break‑
age. In case of an issue the defective part has to be replaced to prevent usage.
12
Function
Starts the air flow and the five minute timer
Stops air flow and resets the timer
Shows device status
Mechanism to remove all pipette tips at once
Mechanism for lowering and lifting of the purging unit
Holder for cuvettes during the purging process
Connection of mains adapter
Switches device on and off
4
5
2
3
®
TIC‑Ex is only permitted to qualified personnel. Please
NANOCOLOR
®
TIC‑Ex is ready for operation.
®
TIC-Ex V 2.0 / 11.17
8 7
Fig. 2: Rear view