4
1. Lift locking mechanism lower (A) (Photo 4). Press down the plastic B to open the locking mechanism
they C (Picture 4)
2. Close the chair according to the direction of the arrow shown (Figure 5)
3. Finally secure the seat with lock jaw (Photo 6)
• Use belt buckle to close the sling on both ends of the central lock.
• To open the belt, press the tabs on the end and pull the tape out. The tape size is adjustable in length.
FOLDING THE STROLLER
5
Close
MOUNTING THE FRONT WHEEL
Before entering, make sure both wheels locking mechanisms from both
legs are properly locked.
so you reach the end of it.. Repeat with both sets of wheels.
Make sure that the wheels are mounted upside down.
The rear wheels are already mounted.
FRONT WHEELS FUNCTIONS
To unlock front wheels, push down the lever located between the two
wheels on each set. To lock the wheels, lift it up.
USE OF BELT
6
EN