Power Supply; Using Batteries; Using Headphones - Oqan QPD-7 ADVANCED DRUM Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Your digital drum will run on either batteries or power adaptor. Follow the instructions below
according to the power source you ingtend to use.
Using an AC- Adaptor
1
Conect the power adaptor to the DC IN jack
located on the rear panel of the unit, and plug the
AC power adaptor into an AC power outlet.
2
Do not use adaptors other than the one specified.
The technical specification of the adaptor is DC
12V output, center positive type.

Using Batteries

Open the battery compartment cover on the undersi-
de of the unit.
Insert six "C" size, R 14, SUM-2 or equivalent batte-
ries. When inserting the batteries, be care to follow
the polarity markings in the illustration.
Note: we suggest to use the alkaline
batteries.
An optional set of stereo headphones can be connected to the
PHONES/OUT PUT jack located on the rear panel. When a pair of
headphones is connected to the jack, the internal speakers of the unit
will switch off automatically, perfect for private practice or late night
playing. If you want to use an external sound system, the headphone
jack can also be used to connect the digital drum to a stereo system
or mixing console.
Turn off the power on all equipment before
making any connections.
Setting up

Power Supply

3
Close the battery compartement securely.
NOTES
Power will be automatically drawn from the AC adaptor
if an optional AC adaptor is connected while batteries are
installed in the instrument.
CAUTION
It is recommended that you replace worn batteries as soon
as possible. When battery voltage drops, the display will dim
and / or the sound will become distorted, when this occurs,
replace the batteries with a complete set of six new batteries
of the same type.
NEVER mix old and new batteries, different types of batteries
(alkaline, magnesium, etc.), Batteries by different makers,
or batteries from the same maker but of different types.
Misuse may cause the instrument to become hot, result in
fire, or battery leakage.
Also, to prevent damage due to battery leakage, remove
all the batteries from the instrument when it is not to be
used for an extended period of time.
Batteries left in an unused instrument will also loose their
power overtime.

Using Headphones

3
PHONE S
KICK
HI HAT
USB
12V

Publicidad

Tabla de contenido
loading

Tabla de contenido