R-100136 is a practical Ultrasonic Bath specially designed for a wide range of applications. For a long working
life and an optimum performance, we recommend you to read carefully the following instructions:
INSTALLATION
Carefully unpack the Ultrasonic Bath. Inside you will find the following accessories:
-
1 draining hose (M).
-
1 power cord (L).
-
1 plastic basket (K).
Choose a flat and firm surface far from heat or vibration sources.
Connect the hose (M) to the drainage pipe (D).
Connect the power cord (L) to the socket of the unit (J) and to a 230 V, 50 Hz earthed power source.
Open the lid (A), place the products in the basket (K) in line and then put the basket inside the tank (B).
In order to prevent scratches and friction of the products, do not pile them up.
Pour water into the stainless steel tank. The water should cover the products but within the min. and max.
marks.
The machine is ready for operation.
CONTROL PANEL AND OPERATIONS
Working time display
1.
It counts down alter work is started.
2.
Green
Orange
Red
Flashing red
All lights
Set temperature display
3.
5 set temperatures can be selected. Press
sequence:
ºC or ºF indicator
4.
Solution usage remaining time
5.
It counts down to show the remaining usage time (hour:minute) of the solution.
Solution warning time
6.
Once the solution usage timer is set, the light Hill come up.
flashing, indicates that solution needs to be changed.
Degas
7.
Illuminated:
Flahing:
Normal cleaning status
8.
Illuminated:
Heater status
9.
Press
button twice. The icon
twice again, the icon
Multistage thermometer:
Water temperature is between 0 and 30 % of set temperature.
Water temperature is between 30 and 60 % of set temperature.
Water temperature is between 60 and 90 % of set temperature.
Water temperature is close to the set temperature.
Water temperature is at the set temperature (90-100 %)
The degas function is selected.
Degassing is underway.
Normal cleaning is underway.
dims, indicating the heater is turned off.
EN
button to select the temperature in the following
flashes, indicating the heater is turned on. Press
button