Product Description - Work Pro W CMU 100 Manual Del Usuario

CMU 100
USER MANUAL
VERSION 1.3

3. PRODUCT DESCRIPTION

CMU 100
It is the main and control unit, and it also provides power to the connected microphones
system. The unit also contains the central audio and switching controls.
CMU 100 allows the connection to a power amplifier system, facilitating a discussion or
conference to be followed by a large audience, as well as for recording it through tape output.
1. Power Switch
2. LIMIT Switch. This knob adjusts the state of the opening microphones. It is divided into
1/3/6 parts. The left three parts mean that the opening microphones are at the non-
shut off automatically state. The right three parts mean that the opening microphones
can be shut off automatically.
3. MIC MASTER. This knob adjusts the volume of all the microphone systems (chairman
and delegates).
4. AUX IN VOLUME. This knob adjusts the volume level from the AUX IN in the rear side.
5. PHONES VOLUME. This knob adjusts the volume level of the monitor headphones.
6. TEL VOLUME. Not operative.
7. TEL Switch. Not operative.
8. PHONES. This jack ¼" allows to connect headphones for monitoring.
9. BAL OUTPUT. This balanced output allows to connect the system with a mixer or
amplifier to expand it.
10. AUX IN. This unbalanced input allows to insert background music or similar in the
meeting. Its volume is controlled through frontal control.
11. LINE OUT. This unbalanced output allows to connect the system with a mixer or
amplifier to expand it.
CONFERENCE SYSTEM www.workpro.es
3